Trash Chute T Handles

This is a Thumb Latch Trigger replacement handle and spindle for trash chute and laundry chute doors. This thumb latch handle is typically suitable for Wilkinson Chutes Hi-Rise intake doors. This is a Thumb Latch Trigger Kit for both BOTTOM HINGED trash chute and laundry chute doors. This thumb latch trigger is typically suitable for Wilkinson Chutes Hi-Rise intake doors. The sliding discharge is used for both trash & linen chutes when the material drops directly into a container. Hopper type discharge doors consist of a stainless steel “B” label constructed type door held open by a 155° U.L.
The UMT™ 200 & 300 Series 24” diameter Bi-Sorter & Tri Sorter was designed for multi-story buildings that wish to sort recyclables away from the buildings trash with a single chute system. With years of experience working in ventilation, Giant Enterprises will set-up a new ventilation unit on your property that will completely change the environment of your site. We can help take all sorts of foul smells and waste away from your property. If you’re unsure about the different ventilation options we offer, feel free to contact us.
Built sturdy with a thickness of 16 ga. aluminized steel or stainless steel, and fully welded seams. Jobsites generate construction debris during new construction and renovation work. We have a temporary steel or plastic system that will allow for safe, easy and cost effective trash removal. The chute system can allow access at every floor and roof levels and deposits the trash into the dumpster at the bottom. For the most part, the chute door handle has a knob on it so you can easily transfer it in the space that the doorway is covering. They are usually small in size to fit between the doorway and the slat.

Therefore, your choice of cleaning products will remain important for years to come. Not every cleaner is a disinfectant, though it can be easy to slip into assuming that your cleaners are also disinfecting. You need to be certain that the cleaners you have selected have disinfectant ingredients.
The intake door and discharge door size is dependent on the size of the chute diameter specified. The table below details the recommended door sizes based on the chute diameter. We can extend a compactor’s life by providing ongoing maintenance. A compactor that receives regular maintenance can outperform and outlast one that does not. Do not take the chance of crossing your fingers and hoping that your compactor will just continue to run forever.

The close-fitting fixture, which gets the trapdoor and the slat, is usually made of steel and is covered with a plastic covering or some other protective cover to avoid rusting. This prevents the metal parts from rusting so they are in great condition once the door needs to be cleaned. The two locking bolts at the rear of the rack will also be protected by a cover to prevent rusting. This traditional door design has been in use for over 50 years and has set the standard.
Our trash, recycling and linen chutes are made of aluminized or stainless steel, depending on the application, and come in standard sizes. Our chute doors are all 100% stainless steel, front and back panels, sides and skirt. We offer a choice of discharge for trash chutes and a standard linen hopper for laundry chutes. A fully trained staff of estimators is available to answer questions, provide training, and work with architects and/or bid and spec writers. Our chutes are found in high rise apartment buildings, office buildings, hotels and hospitals. Comes with a set of two keys that are Keyed Alike forTrash chute&Laundry chute doors.
Noble Ion specializes in the repair of existing trash chute doors in multi-family apartments. Fire code requires that doors latch and close, so don’t wait for the Fire Marshall inspection and risk a citation. Sugatsune America features waste chute doors in stainless steel, making them durable as well as useful in the outdoors.

Still inconsiderate to just leave your garbage there, though the person could be intending to come back and throw it out when the chute unlocks. Multi-Family or Commercial Businesses whose operations include Trash Chutes, Linen Chutes or Recycling Chutes have a big ally in Giant. We have the expertise to sell and install new chutes to General Contractors in new construction.
Overhead Door’s CHUTES’ Odor Control systems require minimal hands-on attention. The trash room system automatically sprays down on a present timer to ensure odors are controlled around the clock. Our technicians will service the unit on a regular basis to ensure it’s operating at 100% efficiency, refill solutions and ensure you and your tenants remain happy with the service.

They are normally a part of the regular door components, which can be made from a metal, bronze, brass, or any kind of steel stuff. The latch is usually concealed in the close-fitting end of the chute handle. Therefore, if you open the door, then you won’t notice that the knob.
Provides access to waste bin under countertop via the side. Chutes are available in 18″, 20″, 24″, 28″, 30″, 36″ diameters. The standard chute size is 24″ per NFPA recommendations. provides the best parts and products available to the professionals that service and maintain Trash Chutes and Laundry Chutes. An ADA lever handle, or L handle, includes a V-Spindle and each handle comes with its own key.
Hopper type discharge doors are used when a 90° offset is required to go thru a wall. This is a Thumb Latch Trigger Kit for both SIDE HINGED trash chute and laundry chute doors . This thumb latch is typically suitable for Wilkinson Chutes Hi-Rise intake doors.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s